Take your Bronco Sport to new heights with the RTR Billet 1.3-inch lift kit

Are you searching for a lift kit that fits your Bronco Sport? Well look no further! The RTR Billet Lift Kit gives your Bronco Sport a 1.3-inch lift. The increased ride height improves your approach and departure angle while allowing you to run a more aggressive wheel and tire setup, like our Tech 6 wheels that also fit Bronco Sport *wink wink*. We recommend a wheel size of 17x7.5 +35 and tire size 245/65Z17 with our lift kit.

Features:

1.3-inch lift (Can be aligned back to Ford factory specifications)
Constructed from, corrosion resistant, 6061-T6 billet aluminum
Fits 2021 Bronco Sport Base, Big Bend, Outer Banks, Badlands, & First Edition
Increased approach and departure angle

Our bolt on billet spacer lift kit is machined from, corrosion resistant, 6061-T6 aluminum and fits all 2021 Bronco Sport trim levels including Badlands and First Edition! Our engineering team always strives to make our products as functional as possible. By utilizing CAD software, they were able to minimize the weight of each spacer by including lightening pockets into the design. Constructing our spacers from 6061-T6 aluminum rather than steel, allowed us to reduce overall weight without compromising strength or ride quality. Speaking of ride quality, we machined a cut out on the front spacers to allow the top of the strut to be properly seated. Resulting in no road vibration or clunking noise!

If you would like to read more or purchase the RTR Billet Lift Kit for your Bronco Sport, please click or tap the LINK. Continue reading to learn how the Bronco Sport lift kit is installed.

How to install the RTR Bronco Sport Lift Kit

You can install this lift kit in your driveway or garage. If you do not have access to a lift, we recommend that you have at least 2 hydraulic jacks for this installation. Below is a list of tools that you’ll need for the RTR Bronco Sport Lift Kit installation.

Tools needed for the front suspension components:

18mm wrench
3/8" socket wrench
1/2" socket wrench
1/4" socket wrench
Pry bar
Torque wrench
8mm socket
10mm socket
13mm socket
21mm socket
T-40 torx bit
Body/trim removal tool

Tools needed for the rear suspension components:

3/8" socket wrench
1/4" socket wrench
1/8" drill bit
15mm socket
18mm socket
5mm allen wrench
Socket Extension
Impact Driver
Slip joint pliers
Mallet
Flathead screwdriver
Center punch
Drift punch
Pry bar
Marker

We would love to see your lifted Bronco Sport! If you have installed the RTR Billet Lift Kit please send us some hi-res images of your Bronco Sport to info@rtrvehicles.com. Here are a few customers who have already installed this product.